Welcome back! Call Vincent now for a FREE quote on your commercial roofing project 215-531-7727

Our last segment on environmentally friendly roofing system options detailed metal roofing systems.  Today’s article discusses rubber roofing systems, specifically, EPDM.

The Technical Stuff:

EPDM (Ethylene Propylene Diene Monomer or Terpolymer) is simply a product consisting of three distinct monomers. EPDM is classified as a Thermoset material. This means it is either fully-cured prior to being installed or that it cures during natural weathering after installation. EPDM roofs are single-ply membranes (only one-ply of roofing material) and not multiple plies laminated together.

EPDM, one of the common types of low-slope roofing materials, has been in use on roofs in the United States of America since the 1960’s and is one of the most common types of low-slope roofing materials. It is relatively inexpensive. It is simple to install. It is relatively clean to work with compared to conventional built-up roofs. Further, it doesn’t emit the odors and fumes that are often associated with built-up roofing systems. Vulcanized EPDM is the most common type of EPDM roofing system.  Non-vulcanized EPDM  is typically used for flashing purposes.

EPDM membrane thickness ranges from 30-mils (0.030″) to 100-mils (0.100″) with the most common thicknesses being 45-mils (0.045″) and 60-mils (0.060″). There are three standard application procedures: (1) fully-adhered; (2) mechanically-fastened; (3) loose-laid.

1. Fully-adhered EPDM uses water-based or solvent-based adhesives to adhere the EPDM rubber to the substrate.
2. Mechanically-fastened EPDM is attached to the substrate by manufacturer-approved mechanical methodology.
3. Loose-laid membranes are secured only at the perimeters and any penetrations. A ballast of round river rock or concrete pavers is used to hold the materials in place. The river rock is usually installed at a rate of 1000 - 1200 pounds per square (100 square feet of roofing surface) and the pavers typically weigh 20-pounds per square foot. Structural integrity is of paramount importance with a loose-laid roof system. The seams are sealed using either an adhesive or a splicing tape.

EPDM roofing is an efficient rubber roof style used on low-slope roofing surfaces. It is great for preventing leaks and is often installed for roofs that have problems with weathering, failing joints, and inflexibility.

EPDM Functionality:

EPDM is made of ethylene propylene diene M-class rubber. This type of rubber is advantageous in that it doesn’t pollute run-off water. As a result, the water that falls off EPDM roofs can be reused for sanitary purposes (for example: roof cleaning, watering a garden or lawn). This water can be reused or recycled with little or no treatment for landscape irrigation and other non-potable uses (often referred to as “gray water”).  This is why EPDM roofing systems also fall into the eco-friendly and/or “green” category of roofing options.

EPDM History:

As previously mentioned, EPDM has been used in roofs since the 1960s. During the 1990s, the attention to environment came to mainstream consciousness and recycling of EPDM started. Today, there are over one-billion square feet of EPDM roofs installed every year. More than twenty-billion EPDM roofs currently exist.

EPDM Benefits:

Highly dependable, economically beneficial, high durability, and high efficiency makes EPDM an attractive option to any building owner looking to a commercial, industrial, and institutional roofing contractor for a new roof or an upgrade to the existing roofing system. Additionally, an EPDM roof will often come with long warranty, low maintenance requirements, low installation labor costs, and generally garner rather easy code approvals. For regions subject to potentially catastrophic weather experiences, such as hurricanes - EPDM roofs have very high resistance, making them quite practical for those who live in those areas.

EPDM is Environmentally Friendly:

EPDM roofs are highly resistant to weathering, ozone, and surface damage. It is flexible in cold weather and still has high fire & heat resistance. EPDM is a sound choice for low-slope roofs and flat roofs that need to be waterproof and durable against the elements. With EPDM roofing, you will have little repair work, no leakage, and a secure roof over your head.

For those seeking eco-friendly, environmentally friendly options, the EPDM rubber roofing system substantially reduces the carbon footprint of a commercial or industrial building in a several ways. The lifespan of a rubber roof is up to 5-times longer than a felt roof. It lasts as much as 3-times longer than an asphalt roof. The installation of an EPDM roofing system is significantly more eco-friendly today. It doesn’t require the dangerous, lengthy use of heat and flames. Add to those benefits the facts that EPDM rubber sheet roofing provides outstanding thermal properties and is a most reliable sealant against water penetration, and you’re left with a fantastic choice in roofing systems with an eye on limiting the environmental impact.

We hope you’ll consider us strongly for your commercial, industrial, or institutional roofing needs.  As a reliable and effective roofing contractor in Philadelphia, the Lehigh Valley, Bucks County, Montgomery County, and many other surrounding areas, we believe our commitment to total customer satisfaction, our reliability, and our track record is one that will impress you.  Please give us a call today or drop us an email using our convenient request-for-quotation page.  Thank you!